This kit contains all the materials you need to retrofit your own VZ Commodore Projector Headlights. Included in this kit is:
- 2x Mini H1 Projectors with all mounting hardware required. (Black and Chrome Shrouds to choose from)
- Clear Lenses Honeycomb available, please contact us if you need your standard lenses etched to match.
- 2x X9 H1 LED bulbs to suit Mini H1 projectors
- 2x 80mm Chasing Halos (with diffusers) to suit standard VZ Low beam projector surround
- 2x 80mm Chasing Halos (with diffusers) to suit Mini H1 projector shroud
- 1x Power converter (Included 10A fuse holder and Fuse)
- 1x SP105e Bluetooth Module
- 1x 4-Way chasing halo driver with Switchback and DRL function
- 2x 3 Pin JST extension cables (Used for passenger side halo connections
- 2x BAU15s Amber LED’s (Recommend changing out stock globes when painting the inside of the headlights)
- 1 Roll of butyl headlight sealant (Enough to do 3-4 headlights)
- 1x Tube of dielectric grease. (This MUST BE used in all 3 pin plugs to prevent water damage. Failure to do so will void warranty on the product)
What you need:
- VZ PROJECTOR Headlights (Calais/HSV). This kit does NOT suit standard reflector fittings.
- Variety of different tools: Philips Head screw drivers, Dremel with cutting/sanding disc, spray paint, seal splitter tools may be needed if headlights are sealed with permaseal sealant.
All retrofitting gear is listed individually on other listings, please refer to those listings regarding warranty period on particular parts of this kit.
LEGALITY FOR ROAD USE
For off-road use only. Please refer to our ADR law information page in the footer (bottom) of our site.
We offer a warranty period of 12 months for the halos and electronics in this kit. This warranty is only valid if these fault were “naturally occurring” and not directly due to misuse of installation.