Are you wanting to retrofit your headlights but are concerned about possible condensation? Our M12 Bolt-on breathers don’t allow condensation in, but they allow moisture/condensation to escape, keeping those lenses clear on your brand new build. We recommend adding 1 or 2 breather per housing. (Bigger headlights will require additional). Installation: Installation is simple, drill […]

Ideal for your DIY Halo headlight project (Where 4 outputs are needed) This system can control 4x halos OR 4x chasing strips only. Included: 12v/5v Power Supply 4 Way Driver Board SP105e Bluetooth Controller This wiring kit needs to be installed out of the weather, they are NOT waterproof/resistant. Dielectric grease MUST be used in […]

Dielectric Silicone Grease. Ideally used for creating a water resistant seal in electrical connectors. Recommended use with 3/5 pin JST connectors used in our Halo/Demon eye headlight builds.

5VDC Bluetooth enabled Android/iOS Compatible with many SRGBWA Applications Suitable for strip/halo control (SRGBWA)

Used to extend the connection of Halos/RGBW Strips and/or demon eyes. 2m in length Available in 3 or 5 Pin models. Contents: 1x 2m JST Extension 12 Month Warranty

Hi - Lens 3.0 is a dedicated High - Beam Projector, with it's 6500k beam designed purely for maximum distance and spread. Designed to be used in those tight spaces where a 2.5/3" Xenon Projector won't. Hi - Lens 3.0 even has a built-in DRL to maximize safety during the day, especially in low visibility conditions. 3" Lens Threaded mounting shaft for easy installation Dedicated DRL built - in Rated Lumens: 3000LM Dimensions: H: 80mm W: 80mm H: 92mm Minimum Housing Depth: 68mm Included: Hi - Lens 3.0 x 2 Mounting Hardware x 2

INSTALLATION INSTRUCTIONS: Universal 3PIN RGBW Controller Installation Insructions   This kit is ideal for retrofitters who are wanting to install halo/demon eyes into their headlights. Included: 1x RGBW Switchback Controller. As our Halos/demon eyes run a SK6812 LED Chipset we can control these perfectly with the Driver module in this kit. This gives smartphone control […]

This kit is ideal for retrofitters who are wanting to install chasing halos into their headlights. Included: 2x Chasing halos with double sided tape backing. 1x Standard 4 Channel Controller + Bluetooth Module These halos run a SK6812 LED Chipset which can be controlled perfectly with the SP105e bluetooth driver. This gives smartphone control to […]

The perfect product for resealing headlights/ tail lights. Neat with little to no mess and easy to use Package contains: 4 Meters of  Retrorubber butyl sealant.   Please note: Outer package received may be different to what is advertised.      

This kit is ideal for retrofitters who are wanting to install chasing HEX halos into their headlights Included: 2x Chasing HEX halos with double sided tape backing. Halo Driver and bluetooth controller required for operation and NOT included in this kit. These halos run a SK6812 LED Chipset which can be controlled perfectly with the […]

INCLUDED: 2x H1 Mini projectors and all mounting hardware needed to install.

The Turbine 3.0 projector shroud is a striking and elegant finish to your retrofit build. This shroud has an acrylic window to support a halo to be mounted behind, giving a true "DRL" affect on your build. Compatible with 3" Projectors Supports Halo Mounting Gloss Black Finish Dimensions: H: 121mm  W: 121mm  H: 51mm Available with 110mm RGBW Chasing halo prefitted. Priced per pair

This kit is designed for those who want to take advantage of the sequential features of our Switchback Halo/Demon Eye controllers.   These patch harnesses stop the need for splicing into your headlight plug for a indicator trigger. With our newly designed patch harness, plugs directly into your existing headlight wiring and headlight, leaving you […]

A H4 Relay Harness is used for the installation of retrofitted projector headlights. This Harness converts the factory H4 plug from the vehicle to allow for low beam & high beam control of the projector when installing projectors into your headlights. Included: 1x H4 Relay Harness Kit

This kit is ideal for retrofitters who are wanting to install chasing LED Strips into their headlights. Included: 1x 1M Roll Chasing Strip (12mm wide) with double sided tape backing. PLEASE NOTE: RGBW Controller NOT included. Please see out other RGBW Controller listings for a compatible controller. These strips run a SK6812 LED Chipset which […]

5VDC 18 Music Responsive Modes 180 Regular chasing modes Brightness control Speed Control Compatible with Switchback drivers. Bluetooth enabled Android/iOS (LEDChord) Compatible with many SRGBWA Applications Suitable for strip/halo control (SRGBWA)

Specifically designed to suit D2S/D2H HID bulbs, our Switchback Lighting 3″ D2S Projectors are designed to impress with fantastic light output even compared to OEM Halogen/HID Projectors. The 3″ Lense provides huge light output specifically compared to standard reflector housings.   Our 3″ D2S Projectors are designed to be retrofitted mainly in existing reflector headlights […]

This kit is ideal for retrofitters who are wanting to install demon eyes into their headlights Included: 2x Demon eyes units 1x 5 Pin JST Extension cable Demon eye controller required for operation and NOT included in this kit. These demon eyes run a SK6812 LED Chipset which can be controlled perfectly with the SP […]

For use with 3" Projectors Gloss Black Rear mount halo compatible Dimensions: H: 126mm  W: 126mm  H: 56mm Priced per pair.

This kit is ideal for retrofitters who are wanting to install demon eyes into their headlights Included: 1x RGBW Demon Eye Driver Box. As our Demon Eyes run a SK6812 LED Chipset we can control these perfectly with the Driver module in this kit. This gives smartphone control to change colours and modes. The colour […]

Solder Sleeve Connectors are used to join 2 or more wires with a completely waterproof and strong seal. Simply slide the sleeve over the conductive join of the wires and heat with a heat gun or flame torch.   Type: Heat Shrink Solder Connectors Insulation: PE Plating: Tin Terminal Body: Copper Color: Red, Blue, White, Yellow Waterproof Rating: IP67 Operating Temperature: -55 ℃ ~ 125 Shrinking Temperature: 80 ℃ Minimum Complete Shrink Temperature: 130 ℃

High Performance with stunning light output External Driver 2.8" Lens Threaded shaft for easy installation. 5700K Colour Temperature Included: 2.8" C12S Bi-LED Projector PAIR Mounting Hardware C12S Bi-LED Projector Driver PAIR

High Performance with stunning light output External Driver 2.5" Lens Threaded shaft for easy installation. 5700K Colour Temperature Included: 2.5" Bi-LED Projector PAIR Mounting Hardware  Bi-LED Projector Driver PAIR

Ideal for Indicator or brake circuits of canbus vehicles. Used to increase load on a circuit to prevent dash errors on canbus vehicles or indicator circuits on vehicles with LED Tail Lights Aluminum housing for optimal heat dissipation. Heat resistant wiring sheath Internally potted for waterproofing. Splice crimps for easy installation.

The "Angry Eye" 3.0 projector shroud is a striking and elegant finish to your retrofit build. This shroud has an "Angry Eye" halo that is mounted in the shroud, giving a true "DRL" affect on your build. Compatible with 3" Projectors RGBW Chasing Gloss Black Finish Includes 2ch Switchback controller for indictor options. Priced per pair