For Installation Instructions, please click the links below.

Installation Guide – Custom Headlights

VF HALO WIRING INSTRUCTIONS

Here at Switchback LED Lighting we also specialize in building and retrofitting headlight fittings.

VF Single Halo Custom Headlights

Features:

• Brand new aftermarket Headlight Fittings
• 1x RGBW Chasing Halo Installed on Low Beam Projector Shroud
• Full housing blackout option – All chrome parts of the standard headlights are changed to black. (Satin Black Outer Bezel, Gloss Black projector shroud/s (low beam), Gloss black indicator section.) HIGH BEAM CHROME BOWL STAYS CHROME.
• Breather modules added to prevent condensation

Optional Extras:

• Demon Eyes (RGBW Colour changing LED added inside the projector (1 Per Headlight)).
• Extras: We offer our X9S LED bulbs as extras with these headlights.
• Housing Blackout: To black the internal chrome out (except high beam reflector bowl) or to leave the chrome as is.

These headlights are made upon order ONLY; we don’t stock completed fittings as everyone has a different headlight feature preference.

INSTALLATION

Plug and Play/ Wiring

Whilst the headlights themselves are plug and play, The halos do need an external controller to operate. Wiring is very simple, essentially it is plug and play besides 1x ground wire. Please see our installation instructions for more details. All LED bulbs ordered will be installed and tested prior to you receiving your new headlights, so no need to install them yourself. Dielectric grease is included with your halo controller, this MUST be used on all 3 pin JST plugs to waterproof the connections. Failure to follow this direction could result in incorrect operation of halos and/or halo failure, which will not be covered on warranty.

INCLUDED:

• 2x Modified Custom Headlight Fittings (Brand New Aftermarket Headlight Fittings)
• The “Optional Extras” you selected.
• Halo Controller
• 1x JST Extension cable
• 1x tube of dielectric grease.

NOTE FOR US CUSTOMERS:

Our headlights start off as a RHD beam pattern. Upon ordering, we look at your shipping address to see if you are a US customer. If you are, we convert our RHD projector cutoff to a LHD cutoff to suit driving on the opposite side of the road to us. This beam pattern is a ECE pattern which complies with our Australian standards, however US standards usually use a different type of lens cutoff called DOT. Please see the differences of the beam patterns below.

Please note: Our headlights are shipped to US customers with a LHD ECE Cutoff.

LEGALITY FOR ROAD USE

For off-road use only, Refer to our ADR Approval page

https://switchbacklighting.com.au/adr/

Lead Time

We estimate a 2-4 week lead time from when the order is placed to when the customer receives the product.

If you require any further information or wish to place a custom order, please check with our staff.

WARRANTY PERIOD

We offer a warranty period of 12 months for any defects in build quality that is affected when building these headlights, this includes headlight seal, and internal paint. Please note: OEM and Aftermarket headlights to suit VF CAN be subject to condensation on the inside of the headlight lens. This is due to the insufficient amount of breathers on these headlights, we do our best to combat this issue: 3x bolt on breather vents added, extra precautions taken when sealing headlight and 2x 10g silica packets are added inside the housing to help prevent this issue.

9 times out of 10 customers will not have this issue, but sometimes in high humidity situations mixed with cold weather it is quite common. Our warranty DOES NOT cover light condensation.

PLEASE NOTE: There is a common issue with the design of these headlights when blacking the housing out. The placement of the projector lens in conjunction with the shroud is very close, if these are left in hot/sunny environments the lens can act like a magnifying glass and reflect onto the bottom section of the shroud. Prolong exposure can cause the bottom of the shroud to start to melt due to this reflection. The only way to truly prevent this issue is to leave the shroud chrome so that the heat is reflected.

Please refrain to leaving your car in these conditions to avoid this issue, as our warranty does not cover this.

We do not offer warranty on the headlight fittings themselves from TYC.