For Installation Instructions, please click the links below.

Installation Guide – Custom Headlights

DEMON EYE 3PIN RGBW INSTALLATION INSTRUCTIONS

Here at Switchback LED Lighting we also specialize in building and retrofitting headlight fittings.

VF “Stock-ish” Custom Headlights

Features:

• Brand new aftermarket Headlight Fittings
• Full housing blackout – All chrome parts of the standard headlights are changed to black. (Satin Black Outer Bezel, Gloss Black projector shroud/s (low beam), Gloss black indicator section.) HIGH BEAM CHROME BOWL STAYS CHROME.
• Breather modules added to prevent condensation

Optional Extras:

• Demon Eyes (RGBW Colour changing LED added inside the projector (1 Per Headlight)).
• Extras: We offer our X9 LED bulbs as extras with these headlights.

These headlights are made upon order ONLY; we don’t stock completed fittings as everyone has a different headlight feature preference.

INSTALLATION

100% Plug and Play

Direct plug and play, unplug your old headlight fittings, plug in your new headlight fittings. All LED bulbs ordered will be installed and tested prior to you receiving your new headlights.

INCLUDED:

• 2x Modified Custom Headlight Fittings (Brand New Aftermarket Headlight Fittings)
• The “Optional Extras” you selected.

NOTE FOR US CUSTOMERS:

Our headlights start off as a RHD beam pattern. Upon ordering, we look at your shipping address to see if you are a US customer. If you are, we convert our RHD projector cutoff to a LHD cutoff to suit driving on the opposite side of the road to us. This beam pattern is a ECE pattern which complies with our Australian standards, however US standards usually use a different type of lens cutoff called DOT. Please see the differences of the beam patterns below.

Please note: Our headlights are shipped to US customers with a LHD ECE Cutoff.

LEGALITY FOR ROAD USE

For off-road use only, Refer to our ADR Approval page

https://switchbacklighting.com.au/adr/

Lead Time

We estimate a 2-4 week lead time from when the order is placed to when the customer receives the product.

If you require any further information or wish to place a custom order, please check with our staff.

WARRANTY PERIOD

We offer a warranty period of 12 months for any defects in build quality that is affected when building these headlights, this includes headlight seal, and internal paint. Please note: OEM and Aftermarket headlights to suit VF CAN be subject to condensation on the inside of the headlight lens. This is due to the insufficient amount of breathers on these headlights, we do our best to combat this issue: 2x bolt on breather vents added, extra precautions taken when sealing headlight and 1x 10g silica packets are added inside the housing to help prevent this issue.

9 times out of 10 customers will not have this issue, but sometimes in high humidity situations mixed with cold weather it is quite common. Our warranty DOES NOT cover light condensation.

PLEASE NOTE: There is a common issue with the design of these headlights when blacking the housing out. The placement of the projector lens in conjunction with the shroud is very close, if these are left in hot/sunny environments the lens can act like a magnifying glass and reflect onto the bottom section of the shroud. Prolong exposure can cause the bottom of the shroud to start to melt due to this reflection. The only way to truly prevent this issue is to leave the shroud chrome so that the heat is reflected.

Please refrain to leaving your car in these conditions to avoid this issue, as our warranty does not cover this.

We do not offer warranty on the headlight fittings themselves from TYC.