This kit contains all the materials you need to retrofit your own VF Commodore Series 1/Series 2 Daytime Running Lights (DRLs). Included in this kit is:

• 1x 1m Roll of RGBW Chasing LED Strip (SK6812-RGBW)
• 1x Box butyl sealant (This will be enough for your headlights as well as your DRLs).
• 2x 12mm Cable Glands
• 2x 2m Braided JST extension cable with male end removed. (This is to be soldered to the LED Strip)
• 1x Power converter (Included 10A fuse holder and Fuse + ring crimp)
• 1x SP105e Bluetooth Module
• 1x 4-Way chasing strip driver
• 1x Tube of dielectric grease. (This MUST BE used in all 3 pin plugs to prevent water damage. Failure to do so will void warranty on the product)

All retrofitting gear is listed individually on other listings, please refer to those listings regarding warranty period on particular parts of this kit.

LEGALITY FOR ROAD USE

For off-road use only. Please refer to our ADR law information page in the footer (bottom) of our site.

WARRANTY PERIOD

We offer a warranty period of 12 months for the electronics in this kit. The strips are not covered under this warranty as the customer will be the one fitting the product, and we can’t guarantee this being done without damaging the strip, we test all strips before shipping to ensure in correct working order.

This warranty is only valid if the customer followed all installation directions and used all relevant parts. (In Depth installation tutorial is on our Tik Tok Channel “switchbackledlightingaus”)