Want some light on your high beams?

This kit stops the need for splicing into your headlight plug for a high beam trigger. With our newly designed patch harness, plugs directly into your existing headlight wiring and headlight.

Kit includes:

• 22″ VIVID Series Laser Lightbar (1 Lux@714m)
• 1x Headlight Patch harness to suit VE/VF
• 1x Lightbar Relay Harness (Single Output)

Note: Relay harness is wired to operate off the supplied switch only. To make use of the headlight patch harness included, the user will need to modify the blue trigger wire to go directly to the green wire on the headlight patch harness. This will mean that the lightbar will turn on and off with your high beams, and not be controlled via the supplied switched.

Expanding on this, if you are wanting to use the isolation switch AND have the lightbar turn on and off via high beams, the WHITE wire will need to be cut/disconnected from the relay end, and joined to the green wire of the headlight patch harness provided. Note that the white wire that is disconnected/cut from the relay end will need to be “made safe” by the means of a wire connector/insulated tape as it is 12V positive at all times normally.

If the above doesn’t make complete sense to you, please send us a message for more information.