We’ve teamed up with IPF 3D Print Works from over in the US to bring you some custom 3D printed gauge pods for the VE/VF Commodore here in Australia.
The VF Dual Shifter Cubby Pod is designed to fit just in front of the shifter. These have been specifically designed to fit 2x 52mm gauge with plenty of room for the wiring needed to hook them up. These are pressure fit pods which means they just press into the pod and are held steady so you don’t need to worry about any mounting points of screws.
Straight off the printer (Support material removed only) These will require sanding, priming and painting by the customer.
Printed in either Black, Grey or White PETG material.
MOUNTING DEPTH OF 52mm GAUGE:
Keep in mind that mounting depths of different branded 52mm gauges can vary, so before purchasing, please verify the mounting depth that is needed for your gauges.
Please note: Upon fitting the pod, you’ll need to remove the factory rubber mat and the two nutserts. These holes are used for routing gauge cables.